WPC decking holzhof

Modern street flooring must be durable, practical and must have a modern design. All of these qualities are combined in holzhof suture type decking .

Specialities of holzhof decking Exquisite unique design - "wood-like" embossed  Two-sided surface. Low specific weight - ideal for roofs and operated ventfacades Can be used for fences: both sides have a nice appearance Modern colour range: wenge, coffee and coffee with milk (by the order white, yellow, ivory, terracotta, anthracite etc.)

Description

Board surface has a patterned embossing of natural sawn wood, which gives it a stylish design and at the same time prevents the possibility of slipping. The other side is already a traditional relief profile ("velvet" surface), which can also be used as a front side. Both sides have a special treatment in order to prevent sliding, which makes it ideal for use as a floor covering in the open air terrace (including arbors, summer kitchen, veranda, outdoor cafes and terraces), piers, decks of ships. Also applied as a Binder eaves and facing of buildings, as a fence board.

Constant qualities of wood-plastic composites, also applied for this board

• Durability. The service life of 25 years and more (as a terrace decking)
• Resistant to rot and mold
• UV-protection due to the UV stabilizers
• High abrasion resistance compared with natural wood
• Minimum expansion from moisture
• Monotone parties (unlike natural wood where not only the tone but color of each board may differ)
• Does not require maintenance and the annual treatment with special structures, wash with plain water is enough
• Environmentally friendly (do not contain toxic substances, such as acetone or phenol, are contained in compositions for the treatment of natural wood)

Technical properties of holzhof decking

Parameter	Unit	Value
Overall dimension	mm	22x140x4000 (22x145x400)
Estimated size (taking into account the expansion gap)	mm	22x145x4000 (22x148x4000)
Recomended lag step	cm	40
Estimated lags number	l.m./sq.m.	3
Weight	kg/l.m.	2,2
Density	kg/m3	1150
Packing in stretch film (4-meter)	pcs. per pack	4
Wood flour type		Pine
Polymer type		PVC
The percentage of polymer and wood flour	%	57/37
Additives, pigments, UV stabilizers	%	6
Maximum withstand load (at recomended lag step)	kg/m2	400
The maximum pressure on the point (before destruction)	kg/cm2	200
Thermal expansion  from -30 to + 50 degrees C°	mm/l.m.	< 1
Operating temperature of decking	0С	- 50 ... + 80
Estimated service life	лет	> 25

Example of holzhof decking application on the facade of the building in Novosibirsk